Just another West epoxy system glue-up. Bits and pieces of red and white oak from the wood bin. The triangular hub has a number of filled lead shot pockets therein. The Mapleshade "Heavyfooters" are on 1/2" threaded brass stock for leveling adjustment - for now the table sits on the 3/4" glass plate, which has two 'hot/cold' gel pads underneath. Rewiring the old Infinity Black Widow tonearm with A-M Systems silver/Teflon wire in (0.0130" diameter) was the hardest thing I've done in a long time. Even with a $100 cartridge (for now) the Teres sounds great! A Ladegaard DIY air bearing arm is in the future. -- John