Click on the picture for a larger view.
Click on the picture for a larger view.
Teres 15 Rev 2. The table is designed to fit into a Target wall-mount shelf and will not sit on a flat surface. For Rev 2 I rebuilt the base with 1.5"x3" aluminum tubing rather than the 2"x3" tubing since the hieght of the 2" tubing prevented proper VTA adjustment. Replaced the AT arm with an original SME 3009. I have a third 1.5"x3" tube if I ever find a 3012 I can afford. If you're wondering why the arm is backwards, the Ladegaard Air Bearing arm I already have the parts for is going across the back of the table. I tried using Plasi-Dip tool coating on the insides of all three tubes, but it didn't stick on the insides of the 1.5" tubing, which was much smooter inside than the 2" tubing. Will have to try some steel wool and re-apply when I get a chance. -- Roscoe